LED, FLEX NEON, ROPE LIGHTING SPECIALISTS

WE LOWERED PRICES ON
ALL 150 FT LED REELS
CHECK IT OUT: “CLICK HERE”

CALL US
TOLL FREE
1.877.319.0241

3/8 INCH INCANDESCENT ROPE LIGHT ACCESSORIES 

3/8 Inch End Cap.  Thimble type translucent end cap.  Used to seal the end of a rope light run.

 In Line 3/8 Inch Splice - Provides a locking splice between two pieces of rope light.
Splice in new sections or join together two different colors of rope light. 

3/8 Inch Invisible Splice - for joining two sections together.  Used to replace sections.  Can be covered
with heat shrink tubing to provide a weather resistant seal.

3/8 Inch Y-CORD - Connects to the power cord, used to permit branching of two runs of rope light.
Complete with Connectors.  Overall length is 3 Ft.  Requires a power cord for connection.

3/8 Inch T- Connector - Rope light connects to the base and then rope light can be branched in two directions

3/8 Inch L-Connector - Makes sharp 90 degree turns.

3/8 Inch X-Connector - Rope light connects to the base and then rope light can be branched
in three directions

Six Foot Extension Cord - The male / female (MF) extends the distance from the power cord
to the rope light - The Female / Female (FF) allows you to run rope light, then the extension
 cord for 6 Ft, and then continue with rope light. 
The FF is very useful if you have area where you don't want light, like across the back of a boat, etc.

For a wiring diagram  Click Here

   Cigarette Lighter Plug - Allows you to plug into 12 VDC Source

 3/8 Inch Shrink Wrap Tubing for 1/2” Rope Light

CLICK BELOW FOR:

Special Requirements?  E-mail or Call us.