|
BRIGHT LIGHT EMITTING DIODE (LED) ROPE LIGHT SPECIFICATIONS
COLORS AVAILABLE: RED, YELLOW, ORANGE, BLUE, WHITE, GREEN
VOLTAGE REQUIREMENT:: Available in 120 Volt or 12 Volt ( AC or DC)
SIZE AVAILABILITY: Round 13 mm (1/2") or 3/8”
LED SPACING: Every One Inch ( 12 LED's per foot.)
EXPECTED LED LIFE: Manufacturer rated at 100,000 hours
CUTTING LENGTH Varies dependent upon Color of LED and voltage.
120 Volt: Yellow ,Red and Orange - Every 5 Ft.
Blue, White and Green - Every 3 Ft.
12 Volt Yellow, Red and Orange- Every Six Inches
Blue, White and Green- Every Three Inches
MAXIMUM RUN LENGTH
120 Volt Yellow, Red and Orange .0040 amps / foot ( .48 watts )
Blue, White and Green .0067 amps / foot ( .84 watts )
12 Volt Yellow, Red and Orange .0400 amps / foot ( .48 watts )
Blue, White and Green .0800 amps / foot ( .96 watts )
For comparison - This is the power consumption on Standard Incandescent Rope Light:
120 Volt Clear Incandescent .0470amps / foot (5.6 Watts)
The patented LED Power Cord provides DC to the LED Rope Light and eliminates Flicker that plagues other manufacturers.
The 120 Volt LED rope light uses 7 to 9 times LESS current than Incandescent.
The 12 Volt LED rope light uses 3.5 to 7 times LESS current than incandescent.
The WHITE LED 110 Volt draws slighly more than ONE AMP for a full 150 Foot run !
MEASUREMENT IN LUMENS
NOTE: The below information is based upon a 120 degree field of view LED.
This is the standard "cut" for LED providing equal light output from all sections of the LED.
|
