WE LOWERED PRICES ON ALL 150 FT LED REELS CHECK IT OUT: “CLICK HERE”
CALL US TOLL FREE 1.877.319.0241
SCARF SKIN FLEX NEON ECON FLEX NEON BELOW IS A CHART SHOWING THE DIFFERENCES BETWEEN THE SCARF SKIN AND ECON FLEX NEON
ECON LED FLEX NEON
SCARF SKIN LED FLEX NEON
DIFFERENCES BETWEEN SCARF SKIN AND ECON LED FLEX NEON
FEATURES
SCARF SKIN
ECON
NOTES
LED TYPE
SUPER ULTRA BRIGHT LED
STANDARD BRIGHTNESS LED
SCARF SKIN OFFERS SUPER BRIGHT LEDS WHILE ECON HAS STANDARD BRIGHTNESS LED’S.
LED SPACING
1.27 CM
1.5 CM
LED’S/UNIT
SEE UNIT CHART BELOW
SEE UNIT CHART BELOW
UNIT MEASUREMENT
SEE UNIT CHART BELOW
SEE UNIT CHART BELOW
LED SPEC
+/- 5 MM
+/- 10MM
OUR MANUFACTURER USES STATE OF THE ART EQUIPMENT TO TEST EACH LED WHICH ENABLES US TO ENSURE CONSISTENCY OF COLOR (WAVELENGTH) AND TO OFF MULTI-TIER GRADES OF PRODUCTS BASED UPON THE ABILITY TO SELECT CHIPS ACCORDING TO THEIR TOLERANCE TO OUR MANUFACTURER STANDARDS.
PVC
TWO LAYER
SINGLE LAYER
THE OUTER JACK OF LED FLEX NEON IS CONSTRUCTED OF PVC AND BASED ON THE TWO GRADES SCARF SKIN AND ECON EITHER A DOUBLE OR SINGLE LAYER OF PVC IS APPLIED. THIS HAS AN EFFECT ON THE OPTICAL ENHANCEMENT OF THE LED COLOR AND LIGHT TRANSMISSION EFFICIENCY.
BASE JACKET
WHITE PVC
NONE
THE FUNCTION OF THE WHITE BASE JACKET IN THE SCARF SKIN IT TO REFLECT “SHAPE” THE LIGHT THE IT IS EMITTING FROM THE LED TO REDIRECT THE LIGHT UPWARD AND OUTWARD TO THE SURFACE OF THE PRODUCT. THUS ENHANCING THE ACTUAL AND PRECIEVED BRIGHTNESS OF THE SCARF SKIN.
STABILITY
HIGH STABILITY
AVERAGE STABILITY
STABILITY OF EACH GRADE IS DIRECTLY CORRESPONDING TO THE QUALITY OF THE LED APPLIED WITHIN EACH GRADE. THE PROFESSIONAL WHICH USES THE HIGHEST QUALITY LED WOULD THEREFORE HAVE ENHANCED STABILITY OVER THE ECON. HOWEVER THE QUALITY OF THE ECON LED STILL CONFORMS TO OUR MINIMUM STABILITY STANDARDS WHICH ARE CONSIDERED TILL HIGHER THAN THE GENERAL MARKET STANDARD.
MTBF (LIFETIME)
LONGER MTBF
AVERAGE STABILITY
LIFETIME IS TERMED BY THE LIGHTING INDUSTRY AS MTBF ( MEAN TIME BETWEEN FAILURE) WHICH IS WHEN 50% OF TRADITION LAMPS FAIL. FOR LED WE USE LUMENS DEPRECIATION AS IT IS RELATIVE TO SSL (SOLID STATE LIGHTING).
LUMENS DEPRECIATION
00,000 TO 80,000 HOURS
40,000 TO 60,000 HOURS
SEE LED LIFETIME INFORMATION BELOW FOR A MORE INDEPTH EXPLAINATION OF LUMENS DEPRECIATION.
COLOR CONSISTENCY
CONSISTENT
SOME INCONSISTENCY’S CAN OCCUR
THE CONSISTENCY OF THE ECON CAN FLUXTUATE DUE TO LED SPEC STANDARD OF +/- 10 MM AND THE SINGLE PVC LAYER PROCESS. THE SCARF SKIN OFFERS THE MAXIMUM CONSISTENCY WHICH IS RELATIVE TO ITS HIGH STANDARD.
CHOMATIC ABERRATIONS
NONE
YES
CHROMATIC ABERRATIONS ARE INCONSISTENCIES IN THE COLOR CONSISTENCY THAT OCCUR WHEN WAVELENGTHS ARE NOT MATCHED COUPLED WITH LESS DIFFUSIVE MATERIALS SUCH AS IN SINGLE LAYER PVE PROCESSING OF THE EXTERIOR JACKET.
PRECIEVED BRIGHTNESS
HIGH
LOWER
SCARF SKIN LED FLEX NEON HAS THE HIGHEST PRECIEVED BRIGHTNESS DUE ALL THE FACTORS LISTED IN THE CHART. HOWEVER ECON HAS ENGINEERED TO PROVIDE A HIGH BRIGHTNESS FOR THE VALUE.
UV TREATMENT
YES
YES
UV TREATMENT EFFECTS COST VERY LITTLE AND IS INCORPORATED INTO BOTH TO ENHANCE BOTH SCARF SKIN AND ECON ABILITY TO BE USED IN HIGH UV AREAS SUCH AS AREAS EXPOSED TO DIRECT SUNLIGHT.
WARRENTY
12 MONTH
6 MONTH
AC POWER SUPPLY
SAME
SAME
.
LOW VOLTAGE
DIFFERENT
THE CUT LENGTH OF ECON HAS BEEN ADJUSTED SO THAT QUALITY OF LED’S PER UNIT AND THE POWER CONSUMPTION MATCHES SO THAT THE SAME POWER SUPPLIES CAN BE USED.
COST TO MANUFACTURE
HIGHER
LOWER
PRICING
STANDARD MARKET VALUE
LOWER PRICES
BASED ON THE INFORMATION PROVIDED IN THE TABLE THERE IS A CLEAR AND DISTINCT DIFFERENCE BETWEEN GRADES THUS DIFFERENT PRICE STRUCTURES APPLY.
